Carel HeaterSteam 4 UR002, Руководство пользователя

Страница: 40 / 92

40
ENG
“heaterSteam” +0300087EN - rel. 1.4 - 22.01.2021
7.9.6 C on t rol from sup e rvisor
With control from supervisor, the unit can be enabled and/or sent a pro-
duction request without using the control algorithms. Once the commu-
nication port for supervisor-unit interaction has been selected, screen
Eh08 will be displayed for enabling or disabling the supervisor offl
ine
alarm.
Index Description Parameter
Eh07 Enable control
from supervisor Set supervisor port
Enable On/Off signal from supervisor
Enable control from supervisor
Eh08
Enable supervisor offl ine alarm
7.9.7 Moni t orin g s e rvi ce s ett in g s
Monitoring service refers to a system that does not have the ability to
manage/act on the unit, but rather simply monitor its operation. The
parameters relating to the management of an external monitoring service
are shown on screen Eh09. However, a unit pause signal from an external
source can be managed and disabled by activating the corresponding
bypass. The bypass can be deactivated manually or reset automatically
after a unit paused reset delay.
Index Description Parameter
Eh09
Monitoring
service settings Display unit paused by monitoring service status
Set unit paused by monitoring service bypass
Unit paused bypass automatic reset delay
7.9.8 R e s ta r t c on t roll e r followin g cha n ge in pro t o c ol
Any changes made to the communication protocols will require a
controller restart. To restart, simply press the “ENTER” button when the
following fl ashing message is shown:
Fig. 7.g
7.10 E. Settings - i. Logout
7.10.1 Lo g ou t from the s ett in g s m e nu (Ins ta ll e r m e nu
a nd Se rvi ce )
Screen Ei01 is used to exit the Settings menu. The screen also describes
the type of login performed (installer or service).
When accessing this screen, the following information will be shown (in
the currently selected language).
To logout press “ENTER”.
The main screen will then be displayed.
Press “ESC” to exit if not wanting to end the session.
7.11 Touch display software update
To update the graphic display, simply enter the system menu (from
the home page), Settings menu and enter the password. The following
screen will be displayed:
Fig. 7.h
Plug the USB key into the display (the mini USB port on the display is
accessible from inside the electrical panel or from inside the front panel),
the “update display” menu will be shown. Click this menu and follow the
steps described on the display to update the software.