Carefree Freestyle RM Скачать руководство пользователя страница 15

Страница: 15 / 25

Carefree of Colorado Service

Manual

REESTYLE

070014-301r6

EPLACING THE

OTOR

RIGINAL

ONFIGURATION

)

1. From the motor end cap remove the cover screws and end cap screws.

2. Carefully pull the end cap and motor partially out of the roller tube.

3. Disconnect the motor wires from the harness.

4. Remove the motor screws from the end cap and set end cap and screws aside.

5. Pull the motor out of the roller tube and set aside.

6. Attach the one-way drive to the new motor with the "A" pointing toward the motor. Secure with the supplied

clip.

NOTICE

The one-way drive must be oriented with the "A" facing the motor. If the drive is not

oriented correctly, the awning not to operate and the arms will spring out when released.

7. Align the one-way drive with the roller tube and start sliding the new motor into the roller tube.

8. Attach the end cap to the motor with the motor screws removed previously. Ensure that the motor is oriented

with the limit switches pointed toward the access holes in the cap.

9. Attach the motor and harness wires, matching the wire colors (Blue to Brown and Brown to Blue). Fold

and tuck the wires and connectors to fit inside the end cap.

10. Align the bearing on the motor and slide into the roller tube.

11. Align the screw holes in the end cap and attach to the awning case.

12. While holding the lead rail, carefully remove any roller tube supports and arm ties. Allow the lead rail to extend

until the fabric is taut. If the lead rail continues to extend after the fabric is taut, the one way drive was installed
backwards. Retie the arms, remove the motor and orient the one way drive as shown.

13. To test:

13.1. Restore

power.

13.2. Use the switch to extend and retract the awning.

13.3. Open the awning halfway, shake the lead rail. If the awning extends, the motor wires are

reversed. Reverse the motor wire connections.

14. After replacing the motor, it will be necessary to adjust the motor limit switches (page 3).

Motor Screws

Cover

Screw

Cover Screw

End Cap
Screws

FRM006a

End Cap

Quick Connects (x2)

Bearing

Motor

“A”

One-Way Drive

Clip

Содержание Freestyle RM


























Результаты поиска

Содержание Freestyle RM

Отзывы:

Похожие инструкции для Freestyle RM

Бренды по названию

Популярные бренды

Carefree Freestyle RM, Руководство по обслуживанию

Результаты поиска

Содержание Freestyle RM

Отзывы:

Похожие инструкции для Freestyle RM

Бренды по названию

Популярные бренды