Cardinal 2XX-IP, Руководство по установке

Страница: 10 / 12

8200-M503-01 Rev-B
•
2XX-IP
8
225 INDICATOR SETUP, CONT.
2. TYPE=X
To select the format of the data transmitted from the 2XX-IP card, press the 2 key and then
the ENTER key.
2XX-IP CONTINUOUS OUTPUT SELECTION
0. SMA 5. SB500
1. SB400 6. SB250/500M
2. TOLEDO 7.
3. IQ355 8.
4. NUMERIC WT 9. TALLEY
TYPE=X
Enter the 1-digit value for the desired format and press the
ENTER key.
For a complete description of the Continuous Output and the Weight On Demand formats,
refer to the CONTINUOUS OUTPUT FORMATS section in the 225 Weight Indicator
Installation and Technical Manual (8200-M698-O1).
7. SCALE=X
In a multi scale configuration the scale to be tracked by the 2XX-IP card can be selected.
Press the
7 key and then the ENTER key.
2XX-IP SETUP MENU
SCALE=XXX
Allowable values are 0 through 5.
NOTE: Scale 1 is the default setting. Also note, 4 is the
Scale Totalizer.
0 = Current Scale (Note that current selected scale is in reverse video mode)
1 = Scale 1
2 = Scale 2
3 = Scale 3
4 = Total
5 = All Scales (
TYPE =
5 = SB500 or 6 = SB250/500M)
2XX-IP Setup Completed
The 2XX-IP setup has been completed, press EXIT (Navigation Keys

UP Arrow) until the
indicator returns to the weight display mode (normal operations).
2XX-IP CARD SETUP
Before operation may begin the Ethernet Device Server must have an IP Address. To facilitate
control over Cardinal indicators on a network, we have included the DeviceInstaller by
Lantronix. See the DeviceInstaller manual on the DeviceInstaller for Cardinal IP Devices CD
(8200-M504-O1) for details.