
8400-M022-O1 Rev K
Model 190 Indicator
66
19.
Repeat steps
11
to
15
to set the value for the maximum acceptable weight for ID 2.
20.
Continue to enter the minimum and maximum acceptable weights for the remaining
IDs for up to ten (10) IDs, or press the
UNITS/◄
key at the
Lo n=
prompt or the
Hi
n=
prompt to skip the entry of the remaining weights.
21.
Repeatedly press the
TARE
key to step through the remaining function prompts until
the indicator returns to the weight display.
22.
Note that if the low weight for ID 1 is set to 0, the Checkweigher function will be
disabled
. The low and high weights must be less than scale capacity and the high
weight must be greater than the low weight.
Target Weight Selection
1.
From the weight display, briefly press and release the
Fn/▲
key.
2.
The display will show the prompt
id=
.
3.
Press the
TARE
key.
4.
The display will show the ID of the currently selected target weight.
5.
If the setting displayed is acceptable, press the
TARE
key to save it.
6.
Otherwise, use the
Fn/▲
key to enter a new value for the ID.
7.
When the desired value is displayed, press the
TARE
key to save it.
8.
The indicator will return to the weight display.
Checkweigher Operation
With the Checkweigher function enabled and activated, during operation the indicator will
compare the displayed weight with the preset values and display the results as under, accept,
or over.
When the displayed weight is less than the minimum acceptable weight, the arrow over
OUT1 <
(the UNDER annunciator) will turn on and the display will change to the color
selected in the section, Display Backlight Color Setup.
When the displayed weight is greater than the maximum acceptable weight, the arrow
over
OUT3 >
(the OVER annunciator) will turn on and the display will change to the
color selected in the section, Display Backlight Color Setup.
When the displayed weight is within the range from minimum acceptable weight to
maximum acceptable weight, the arrow over
OUT2
⊕
(the ACCEPT annunciator) will
turn on and the display will change to the color selected in the section, Display
Backlight Color Setup.