Cardinal Health Alaris 8000 Series, Инструкция по применению

Страница: 83 / 378

Programming
2-27 Alaris
®
System Directions for Use
Pump and Syringe Modules Section
>Enter Bolus Dose
_ _ _ _
unit/kg
A A A
DOSE
PATIENT
WEIGHT
BOLUS DOSE
DURATION
[Conc]: 1 mg/mL
SETUP
Guardrails Drug Setup
Alteplase
CONT-
INUOUS
CHANNEL
SELECT
CHANNEL
OFF
RESTART
PAUSE
ALARM
INFUSE STANDBY
ALARM
INFUSE STANDBY
CHANNEL
SELECT
CHANNEL
OFF
PAUSE
RESTART
RATE (mL/h)
3. An optional hospital-defined and editable starting value
for bolus dose and/or bolus rate duration may already be
entered.
OR
To enter bolus dose, use numeric data entry keys.
• After a bolus dose and weight (if used) are entered,
bolus
VTBI
and concentration [conc] alternate in Main
Display.
• If no weight has previously been programmed in
system and bolus dose is weight-based, weight entry
is empty.
• If programmed continuous dose is weight-based,
programmed weight displays.
• If bolus dose is not weight-based, Not Used displays
in
PATIENT WEIGHT
field.
4. To enter or change patient weight (if used), use applicable
following procedure, depending on whether or not
continuous dose is weight-based.
• To enter a weight when continuous dose is not weight-
based:
a. Press
PATIENT WEIGHT
soft key.
b. To enter patient weight, use numeric data entry
keys.
OR
• To change weight when continuous dose is weight-
based:
a. Press
SETUP
soft key.
b. Press
PATIENT WEIGHT
soft key.
c. To change patient weight, use numeric data entry
keys.
Bolus Dose (Continued)
-- Continued on Next Page --
Primary Infusion
- With Guardrails
®
Suite MX Protection (Continued)