3
installation manual
3. ATTACHED FITTINGS
Please check whether the following fittings are of full scope. If there are some spare fittings , please restore them carefully.
Fig.3-1
Never throw or beat the controller.
Before installation, operate the remote controller to determine its location in a
reception range.
Keep the remote controller at least 1m apart from the nearest TV set or stereo
equipment. (it is necessary to prevent image disturbances or noise interferences.)
Do not install the remote controller in a place exposed to direct sunlight or close to a
heating source, such as a stove.
Note that the positive and negative poles are right positions when loading batteries.
This manual is subject to changes due to technological improvement without further
notices.
Cautions on remote controller installation:
Remote
controller
Remote controller
holder
Mounting screw B
ST2.9x10-C-H
RESET
TIME ON
TIME OFF
CLOCK
SWING
AIR DIRECTION
OK
ECO
SWING
MODE
FAN
SPEED
M
LOCK C/H
AUTO
COOL
DRY
HEAT
FAN
TEMP
SET
CLOCK
SET
HOUR
FAN SPEED
QUANTITY
SHAPE
NAME
1.Hook
9. Owner's manual
10. Installation manual
11. Remote controller manual
5. Remote controller
6. Remote controller holder
8. Alkaline dry batteries (AM4)
2.Hanging arm
3.Orifice
4.Anti-shock rubber
2
2
1
1
1
1
2
2
1
1
Installation fittings
Remote controller & Its Holder
Others
7. Mounting screw(ST2.9×10-C-H)
1
Both side covers may be installed on 42K-48K unit already, or be put into the accessories.
