Cardiac Science Cardiac Stress, Руководство пользователя

Страница: 43 / 62

70-00297-01 A TM 55/65 Treadmill 4.0
4-12
Maintenance/Troubleshooting
Use the following table to diagnose problems with the treadmill.
Table 4-1: Troubleshooting Guide
Problem Possible Cause Remedy
Treadmill will
not run
Treadmill or monitoring
system power cord is not
plugged in.
Plug in power cords.
Interface cable
disconnected or damaged Plug in and secure interface cable.
Replace if damaged.
Monitoring system power
off. Turn on power. Check AC power, if
necessary.
Circuit breaker on treadmill
hood reads OFF. Set the circuit breaker switch on
the treadmill to ON.
1. Start key not selected.
2. Not in proper menu.
Press proper key on monitoring
system control panel. Consult
stress test system user guide.
No power at outlet Check building circuit breaker.
Voltage below nominal
Provide dedicated line for
treadmill.
Emergency Stop button has
been unplugged. Plug into connector on front of
hood.
Emergency Stop button
activated. Turn emergency stop button
counter-clockwise to deactivate.
Internal problem.
Service required. Contact an
authorized technician.
Walking belt
too far left or
right
Improper belt tracking.
Adjust tracking (see “Belt Tracking”
on page -6). If problem persists,
contact an authorized technician.
Walking belt
slips, but front
roller turns.
Improper belt tension
Adjust belt tension (see “Belt
Tension” on page -4). If problem
persists, contact an authorized
technician.
Walking belt
hesitates;
adjusting
walking belt
tension is
ineffective
Internal drive belt slipping.
Service required. Contact an
authorized technician.
Treadmill will
not change
grade.
Excess weight on treadmill. See Appendix B for maximum load.
Internal problem.
Service required. Contact an
authorized technician.