Cardiac Science Cardiac Stress, Руководство пользователя

Страница: 59 / 62

70-00297-01 A TM 55/65 Treadmill 4.0
B-8
Testing the Treadmill
!
WARNING! Falling hazard.
DO NOT permit anyone to stand on the treadmill when it is started.
To test the treadmill:
1.
Connect the treadmill power cord to the correct power outlet. Turn on treadmill
power.
2.
Start the walking belt from the monitoring system: the treadmill starts running
immediately at low speed.
3.
Set the treadmill to minimum speed and zero grade and confirm that the treadmill
meets these values.
4.
Set the treadmill to maximum speed and confirm that the treadmill meets that value.
5.
Set the treadmill to maximum grade and confirm that the treadmill meets that value.
6.
Let the treadmill run for at least 15 minutes.
a.
Watch the walking belt carefully to ensure that it does not drift left or right. Adjust
if necessary using the adjustment procedures in
Adjustments on page 4-4.
b.
Listen for unusual noises, such as squeals or squeaks. The treadmill should run
quietly.
c.
Reduce speed and grade until the treadmill belt is moving at a reasonable speed for
walking.
d.
Walk on the moving belt and verify proper operation at representative speeds and
grades. If the walking belt slips, but the front roller turns, adjust the walking belt
tension.
7.
When the test is finished:
a.
Set the treadmill to zero grade.
b.
Stop the walking belt.
c.
Turn off the monitoring system.
If your treadmill is not running smoothly, contact an authorized technician before using it.