Cardiac Science Cardiac Stress, Руководство пользователя

Страница: 37 / 62

70-00297-01 A TM 55/65 Treadmill 4.0
4-6
Maintenance/Troubleshooting
Belt Tracking
Perform this procedure whenever the belt moves to one side or the other.
!
WARNING! Falling hazard.
Stay off the belt when adjusting the tracking. Do not touch or grab the walking belt while it
is moving.
To adjust the belt tracking:
1.
Use the controls on the monitoring system to start the treadmill at minimum speed
and grade.
2.
Increase speed to 6 mph (9.5 km/h) and make the following adjustment (See
Figure 4-1 for the location of the bolts):
•
If the belt moves to the right, rotate the right tension bolt clockwise 1/4 turn.
•
If the belt moves to the left, rotate the left tension bolt clockwise 1/4 turn.
3.
After making an initial adjustment, run the treadmill for several minutes and observe
how the belt tracks; adjustments to belt tracking take several minutes to become
apparent. If the belt continues to move off center, adjust accordingly until it is
properly centered.
If more than three adjustments are necessary, call an authorized technician.
!
Caution. Damage to belt and rollers.
Do not overtighten the walking belt. Overtightening can damage the belt and rollers. Do not
torque adjustment screws beyond 80 in/lb. (9N/m) maximum.
4.
Stop the treadmill.
5.
Check the position of the rear roller guards and adjust if necessary (see Figure 4-2 ).