16
APPLICATION NOTE
The AR can be set to perform up to 25 functions automatically from a time schedule that is set with Code 79 (Code
80 prints available options). Code 10 prints the AUTO EVENTS time table. All events can be performed manually, but
some might be better done on a date or time that management is not available.
#
04 WHO'S IN LIST MON
10/28/2013 7:11p
==========================================
WHSE
IN SMITH MARIAN 14217 99
IN JONES LUIS 17267 98
in KING ANA 19278 98
in FERNSTRON SHOMAR 20041 98
in SAGREDO LUIS 22840 99
To Print Reports
(all printed reports listed at end of this manual)
Swipe Manager Access Card
Press F2
Enter the code for desired report (most often used codes are printed on the Manager
Card and all codes are listed at the end of this instruction).
Sample Time Card
A single Time Card can be printed for each
employee. If cleared weekly, a card has 7
days, bi-weekly 14 days, etc. In the
example, the total does not include hours
for <FP> days until manager corrections
(code 8) are made.
The total hours for each day of the week
(MON-SUN) is printed at the bottom of
each time card. This is useful on weekly
pay periods, but not on greater periods.
The total day printing can be removed.
Press F4
and enter 14 as the passcode to remove the daily totals or 7 to restore them
W
ho’s at Work Now
Who’s IN 4 report shown: upper case shows
employee is currently punched IN and lower
case employee is on paid Punch ID break.
Site Setup and Auto Functions
Code 10 prints the AR default values for options B, O, E, D, N, X the auto events set
times and other defaults specific for your machine.
