Voltage:
230V. 50 Hz. ~
Max. absorbed power
1200W
Max. active power
750W
Capacitor
20 µF
Weight
25 Kg.
Basket capacity
50 Kg.
Admissible working conditions:
INTERMITTENT - S3 25%-SERVICE
25% - 5 min. under load running
75% - 15 min.
.
rest
Rotation Speed:
55 min
-1
IP Degree:
44
Recommended use:
TILE ADHESIVES, CEMENT, PAINTS, VARNISH
AND EPOXY RESINS.
The noise level of the machines has been
measured in compliance with standard ISO3745-77.
Lw
76,6 [dBW(A)]
Lw
62,7 [dB(A)]
Before using the machine read the safety
instruction chapter carefully.
All machines have been thoroughly tested and
checked before leaving our factory.
Carat Centrale B.V. works for a continuous
development of the machines the company
manufactures, therefore the company reserves
the right to modify its models. No rights can be
claimed as far as the data and the pictures of
this manual are concerned.
The MIXER 50S is a mixing machine for tile
adhesives, cement, paints, varnish and epoxy
resins.
•
The manufacturer declines any liability for the
use of the MIXER with tools and materials other
than the original ones and not indicated in the
paragraph "RECOMMENDED USE".
•
The MIXER is designed to work exclusively
according to the admissible working conditions
indicated.
•
Switch off the MIXER when the mixing process
has finished.
•
Space out the mixing processes as specified in
chapter 6.
•
Never introduce foreign objects or tools into the
basket during operation with the agitator in
rotation.
•
The power supply cable is not supplied with the
machine. The machine can be connected using
a normal extension with a minimum section of
3 x 1.5 mm2, fitted with a Franco-German plug;
type: SHUKO.
Assemble the top frame and the transporting handle
as shown in Fig. 1.
Insert the connecting pin fixing it with the safety clip.
GB
16
2. Precautions
1. Use
Technical data
3. Installation
1
1
CAUTION !
CAUTION !
