CTR9 Car-O-Liner
Group
AB
49023, EN - rev. 4,
2020-01
81
6.8 Turning
off
cooling
water
when changing electrodes
When you change electrodes you need to turn off the cooling water pump in
order to prevent water from pouring out from the yoke.
1.
Press the "Water flow" button to turn OFF the cooling water pump.
2.
Red box with "Water flow off" is shown.
3.
After changing the electrodes, press the "Water flow" button again
to turn ON cooling water pump before you start welding!
IMPORTANT!
It is not possible to start welding before cooling water
pump flow is turned on.
