Car-O-Liner Group AB
CTR9
10
49023, EN - rev. 4, 2020-01
2 Safety
2.1 General
The CTR9 has been designed and tested to meet strict safety requirements.
The instructions provided together with the CTR 9 cover the equipment in
the as-delivered state. No modifications shall be made and if the user does
not respect the instructions covered in this manual a risk analysis of the
user’s responsibility must be made prior using the equipment.
Please read the following instructions carefully before operating the CTR9
and refer to them as needed to ensure the continued safe operation of the
welder.
Information provided in this manual describes the suggested best working
practices and should in no way take precedence over individual responsibili-
ties or local regulations.
Great effort has been placed on the design and manufacture of the CTR9
so that it will comply with all applicable safety aspects for this type of
equipment. During operation and other work, it is always each individual’s
responsibility to consider:
Their own and other’s personal safety.
The safety of the welder through correct use of the equipment in
accordance with the descriptions and instructions provided in this
manual.
By observing and following the safety precautions, users of the CTR9 spot
welder will ensure safer working conditions for themselves and their fellow
workers.
2.2
Warnings and important notices
The following types of safety signs are used on the equipment and in
Car-O-Liner’s instruction manuals:
Prohibited
Prohibits behaviour that can cause injury.
Command
Prescribes a specific responsibility or action.
