CTR12000 Car-O-Liner
Group
AB
41644, EN - rev. 2, 2012-09
37
Entry of points for welding characteristics in ELMA-QS mode
As already described in chapter 3.6 Further Adjustments, you can select and
edit individual data fields by using the rotary encoder. Values being outside
the corresponding MIN/MAX limits are not accepted for entry.
When you change one or several data fields, for example thickness, the fol-
lowing screens will appear:
Synergic characteristics for the most common welding jobs have already
been drawn up and memorized by the manufacturer. If need be, they can be
adapted to customer’s requirements.
Any modification of data fields (synergy or other parameters) made in the
EDIT mode is marked with and displayed between two asterisks (* *) and
stored in the computer’s buffer memory. Modified data are thus immediately
available for the welding process.
The defined values of a synergy table are indicated in percent (“%“). Choose
one point to have displayed the associated synergic parameters.
