Car-O-Liner Group AB
CTR12000
42
41644, EN - rev. 2, 2012-09
b) How to create or modify a Job?
In order to create or modify a special job and save the corresponding set-
tings, first activate the field “
SELECTION
“ and select a synergic program
from the right menu field.
To give you an example how the screen could look like:
Now activate the DISPLAY mode (Soft key DISPLAY).
Use the potentiometer “
Power
“ l/kA to adjust the desired total material
thickness and perform a test weld.
Optimize the welding parameters in the menu “FURTHER ADJUST-
MENTS“ (key lock switch in position “EDIT“) and save the optimum value
as “working point“, e.g. “J01 COMPONENT A“. The maximum number of
available memory locations is 99 (from J01 to J99).
CTR12000
