Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
7
2.
Installation
Switch off the ignition and disconnect the vehicle’s battery! The interface needs a
permanent 12V source. If -according to factory rules- a disconnection of the battery has to
be avoided, it should be sufficient to use the vehicle’s sleep-mode. In case, the sleep-mode
doesn’t succeed, the battery has to be disconnected with a resistor lead.
The Interface needs a permanent power supply! If power isn’t directly taken from the
battery, the connection’s power has to be checked for being start-up proven and
permanent.
2.1.
Place of installation – video-interface
The video-interface is installed on the backside of the head-unit.
2.1.1.
Place of installation - daugter PCB-box
The daughter PCB is performed to be installed on the rearside of the head unit. The
connection has to be done between the monitor panel and the head unit’s motherboard.
