Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
16
Click out the copper coloured 8pin ribbon cable from the monitor mainbord’s ribbon
cable base, connect it to the daughter PCB’s 8pin ribbon cable merger
PNL OUT
and lock
it’s closure.
Note:
The ribbon cable has to be lead in with its contacting side towards the merger’s
PCB side!
Connect the daughter PCB’s 8pi touch ribbon cable
PCB IN
to the previously become free
monitor mainboard’s ribbon cable base and lock it’s closure.
Note:
Lead in the ribbon cable with its contacting side towards the merger’s PCB side!
Warning notes, concerning the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable’s contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
3) Avoid cable contusion or cable injury caused by sharp-edged metal.
