Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
15
2.5.2.1.
Connection of ribbon cables for the after-market navigation NAV-FN900E
For leading out the 8pin touch ribbon cables out of the monitor housing, both metal
sheet tabs underneath have to be bent down to avoid a cable injury with later
reassembly of the housing parts. Further, for saving the ribbon cables, the down bent
sheet tabs should be covered with a piece of smooth tape.
Carefully unlock and pull back the 8pin touch ribbon cable base closure on the right side
of the monitor motherboard like shown in the picture.
