Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
11
Screw in the daughter PCB box at the rearside of the head-unit by using the enclosed screws
Note:
If the ribbon cables might come in contact with the housing components, they have to
be isolated to avoid short circuits and cable injury.
2.3.1.
Warning notes, concerning the installation of ribbon cables
1) The contacting ends of ribbon cables always have to be installed in a straight and precise
180° position to the connector. Each deviation from a perfect contact position will curse
faulty contact and even danger of short circuit
2) The ribbon cable’s contacting side always has to correspond to the contacting side of the
connector, concerning the mounting position.
3) Avoid cable contusion or cable injury caused by sharp-edged metal.
X
only with
NAV-FN900E
