Version 17.02.2020
HW: 32
CI-VL2-UCON8-AO
P
a
g
e
21
2.7.
Picture settings and guide lines
The picture settings are adjusted by the 3 buttons on the video-interface. Press the
MENU
button to open the OSD settings menu. To switch to the next menu item, pressing
UP
and
DOWN
will change the selected value. The buttons are embedded in the housing to avoid
accidental changes during or after installation. The picture settings have to be done
separately for RGB, AV1 and AV2 while the corresponding input is selected and visible on the
monitor.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
IR-AV1 out of function
IR-AV2 out of function
Guide lines (ON/OFF)
Note:
If the CAN-box does not support the vehicle’s CAN, the guide-lines cannot be used,
even if they appeared once after connecting the system.
