Caple CM209WH, Техническая информация, Страница: 53 / 55

Component replacement and adjustment procedure
7.23
Door internal labyrinth glass gasket substitution
Figure 1
1. Remove the door from the oven section 7.3.
2. Put the door on a flat surface with a soft cloth to
prevent scratching of the aesthetics.
3.
Remove the external glass from the door
unscrewing two screws on the corner
(fig.1) .
4. Remove also the four brackets on the corner to
remove the middle glass.
When it is changed or removed an middle
glass you must be sure that the face whit
(THERMO REFLECTIVE) printed it is towards
the cavity
(fig.2).
5.
To remove the labyrinth unscrew the six screws
from its frame, and dismount the gasket
damaged by hand.
(fig.3) .
6.
Assemble the new one by previous reverse
steps.
7.
Assemble the external glass and door keeping
door in the middle of the glass
8.
Replace the Oven door following the (section
7.3).
9.
Run the Oven and check all functions and
microwave emission
(section 1.2).
Figure 2
Figure 3