Caple CM209WH, Техническая информация, Страница: 37 / 55

Component replacement and adjustment procedure
7.7
Rotating Dish Motor Substitution
Figure 1
Figure 2
1.
Disconnect the power supply cord and remove the
Oven from the cabinet.
2.
Open the door and remove the plastic insert (fig1).
1.
Put the oven with the door on a horizontal surface
with a soft cloth to prevent scratching of the
aesthetics.
3.
Remove the upper, rear and lateral covers to
access to dish motor.
4. Disconnect the terminals.
5. Remove the two screws to remove the motor
damaged
(fig.2).
6.
Replace the new one by reversing the previous
steps.
7.
Connect the terminals.
8.
The connections must not be loose.
9.
Reinstall the Oven into the cabinet.
10.
Reconnect the power supply cord after the Oven is
installed.
11.
Run the Oven and check all functions and
microwave emission
(section 1.2).