Caple CM209WH, Техническая информация, Страница: 36 / 55

Component replacement and adjustment procedure
7.6
Grill element substitution
Figure 1
Figure 2 Figure 3
1. Disconnect the power supply cord and remove the
Oven from the cabinet.
2. Remove the upper cover.
3. Remove the internal component cover (fig 1) by its
six screws.
4. Remove the probe from its location using a clamp
make rounded the border to extract it.
(fig.2).
5.
Disconnect the terminals.
6.
Unscrew the nuts (fig.2).
7.
Than open the door to access to the heating
element on the top of the cavity and unscrew the
central screw
(fig.3) to remove the element
damaged.
8. Replace the new one by reversing the previous
steps
9. Connect the terminals and insert the temperature
probe, crushing the entrance to make oval it to
prevent the escape.
10.
The connections must not be loose.
11.
Reinstall the Oven into the cabinet.
12. Reconnect the power supply cord after the Oven is
installed.
13. Run the Oven and check all functions and
microwave emission
(section 1.2).