manualshive.com logo in svg

Caple CM209WH, Техническая информация, Страница: 22 / 55

Поделиться
Скачать
Caple CM209WH Скачать руководство пользователя страница 22

  

NOTE: A MICROWAVE ENERGY LEAKAGE TEST MUST ALWAYS BE PERFORMED WHEN THE UNIT IS SERVICED FOR ANY REASON.

 

BEFORE TOUCHING any parts of the oven, always remove the power plug from the outlet.

 

For about 60 seconds after the oven stops, an electric charge remains in the high voltage capacitor. When replacing or checking, you must wait to permit the capacitor 
discarding.

 

  

Troubleshooting guide

 

4.2

 

Microwave oven doesn’t work 

 

Anomaly

 

Possible Cause

 

Corrective Action

 

section

 

Oven does not run 

 

No power supply

 

 

 

Inserting many plugs into one

 

outlet and using them at the

 

same time (blown fuse or 
breaker)

 

Avoid using other electrical

 

appliances when you use the

 

microwave oven.

 

Replace the fuses 

 

 

 

--

 

Short circuit

 

 

 

Find the short circuit and remove it.

 

Check internal connections (short circuit, interruptions, 
etc..)

 

 

 

--

 

Microwave oven plug is not

 

inserted tightly.

 

Insert microwave oven plug

 

securely.

 

--

 

Oven does not run 

 

Power supply ok.

 

 

 

Door switches damaged

 

Check for continuity of the switch with an Ohm-meter

 

--

 

Connections to the Electronic 
Control

 

 

 

Replace the Power Board

 

7.18

 

Check the main fuse on Electronic Board

 

--

 

Magetron is damaged

 

 

 

1. Measure the resistance. (Ohm-meter scale: Rx1)

 

• Filament  terminal (Wire leads are removed)

 

Normal: Less than 1 ohm

 

 

 

2. Measure the resistance. (Ohm-meter scale: Rx1000)

 

• Filament to chassis (Wire leads are removed)

 

Normal readings: Infinite

 

7.8

 

Fuse is interrupted 

 

Check continuity of fuse by ohm - meter

 

7.19

 

Содержание CM209WH
























































Отзывы:

Нет отзывов