-21-
Operation
4
5332M-0401-080E
Safety Pin
Adjusting Height (Rear Part)
1. Slide seat to the rear-most position.
2. Pull up seat and push safety pin toward
inside to hold seat lifted.
• Pulling up seat bracket: Page 52.
• Move seat and to check if the seat is locked
securely.
• Height can be adjusted in 3 levels.
5332M-0401-090E
Seat Switch Bracket
Bolts
3. Remove 4 bolts fixing seat switch bracket.
4. Move seat switch bracket into desired
position and fix with bolts firmly.
5. Pull safety pin back and lower the seat.
NOTE
Adjusting Height (Front Part)
1. Pull up seat and push safety pin toward inside to hold seat lift up.
2. Adjust seat switch bracket in the highest position.
If the seat height is not high enought with the rear part of seat in the highest position, adjust
height of front the part of seat.
• Seat switch bracket need to be in the highest position when addjusting height of
front part of seat.
NOTE
5332M-0401-150E
Bolt
Nut
Front Hole
3. Loosen nut (left and right) fixting hinge of
seat.
4. Remove bolts on both sides.
5. Move seat so that front hole lines up with
bolt hole and fix with bolt on both sides.
6. Tighten nuts.
7. Pull safety pin back and lower the seat.
