37
EN
HANDLING THE REMOTE CONTROLLER
When the batteries are removed, the remote controller erases all programming.
After inserting new batteries, the remote controller must be reprogrammed.
NOTE:
Use the remote controller within a distance of 8 meters from
the appliance, pointing it towards the receiver. Reception is
confirmed by a beep.
The remote controller is powered by two dry batteries (R03/LR03X2) housed in the rear part and protected by a cover.
1. Remove the cover by pressing and sliding off.
2. Remove the old batteries and insert the new batteries, placing the ( + ) and ( - ) ends correctly.
3. Reattach the cover by sliding it back into position.
Location of the remote controller
Replacing batteries
8m
SILENCE
FP
MODE
SWING
SWING
ON/OFF
RESET
LOCK
TURBO
SELF
CLEAN
LED
FOLLOW
ME
TIMER
ON
TIMER
OFF
TEMP
FAN
SPEED
SLEEP
CAUTION
CAUTION
•
Do not mix old and new batteries or batteries of different types.
•
Do not leave the batteries in the remote controller if they are
not going to be used for 2 or 3 months.
•
Do not dispose batteries as unsorted municipal waste. Collec-
tion of such waste separately for special treatment is necessary.
•
The air conditioner will not operate if curtains, doors or
other materials block the signals from the remote controller
to the indoor unit.
•
Prevent any liquid from falling into the remote controller.
Do not expose the remote controller to direct sunlight or
heat.
•
If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may not
function properly. Use curtains to prevent the sunlight from
falling on the receiver.
•
If other electrical appliances react to the remote controller,
either move these appliances or consult your local dealer.