32
EN
HANDLING THE REMOTE CONTROLLER
Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the indoor
unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired temper-
ature. The temperature can be set within a range of
62°F~86°F in 1 F increments.
3. Press the ON/OFF button to start the air conditioner.
Note:
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating by
sensing the difference between the actual ambient room
temperature and the set temperature on the remote
controller.
2. In the Auto mode, you can not switch the fan speed. It
has already been automatically controlled.
3. If the Auto mode is not comfortable for you, the desired
mode can be selected manually.
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL, HEAT (cooling
& heating models only) or FAN mode.
2. Press the UP/DOWN buttons to set the desired tem-
perature. The temperature can be set within a range of
62°F~86°F in 1°F increments.
3. Press the FAN button to select the fan speed in four
steps- Auto, Low, Med, or High.
4. Press the ON/OFF button to start the air conditioner.
Note:
In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control the
room temperature either. In this case, only step 1, 3 and 4
may be performed.
SILENCE
FP
MODE
SWING
SWING
ON/OFF
RESET
LOCK
TURBO
SELF
CLEAN
LED
FOLLOW
ME
TIMER
ON
TIMER
OFF
TEMP
FAN
SPEED
SLEEP
FRESH
SILENCE
FP
MODE
SWING
SWING
ON/OFF
RESET
LOCK
TURBO
SELF
CLEAN
LED
FOLLOW
ME
TIMER
ON
TIMER
OFF
TEMP
FAN
SPEED
SLEEP
FRESH
2
2
2
2
3
3
4
1
1
F
auto
silence sleep follow me lock
run
cool
SET TEMP
TIMER ON OFF
dry
heat
fan
F
auto
silence sleep follow me lock
run
cool
SET TEMP
TIMER ON OFF
dry
heat
fan
Auto operation
Cooling /Heating/Fan operation