34
EN
HANDLING THE REMOTE CONTROLLER
CAUTION
The effective operation time set by the remote
controller for the timer function is limited to the
following settings:
0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10,
11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
Pressing the TIMER ON button can set the auto-on time of the
unit. Pressing the TIMER OFF button can set the auto-off time
of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote controller shows
TIMER ON, the last Auto-on setting time and the signal
“h” will be shown on the LCD display area. Now it is
ready to reset the Auto-on time to START the operation.
2. Press the TIMER ON button again to set desired Auto-on
time. Each time you press the button, the time increases
by half an hour between 0 and 10 hours and by one
hour between 10 and 24 hours.
3. After setting the TIMER ON, there will be a one second
delay before the remote controller transmits the signal to
the air conditioner. Then, after approximately another
2 seconds, the signal “h” will disappear and the set
temperature will re-appear on the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote controller
shows TIMER OFF, the last Auto-off setting time and
the signal “h” will be shown on the LCD display area.
Now it is ready to reset the Auto-off time to stop the
operation.
2. Press the TIMER OFF button again to set desired Auto-off
time. Each time you press the button, the time increases
by half an hour between 0 and 10 hours and by one
hour between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one second
delay before the remote controller transmits the signal to
the air conditioner. Then, after approximately another
2 seconds, the signal “h” will disappear and the set
temperature will re-appear on the LCD display window.
TIMER ON (Auto-on Operation)
The TIMER ON feature is useful when you want the unit to
turn on automatically before you return home. The air condi-
tioner will automatically start operating at the set time.
Example:
To start the air conditioner in 6 hours.
•
Press the TIMER ON button, the last setting of starting
operation time and the signal “h” will show on the
display area.
•
Press the TIMER ON button to display “6:0h” on the
TIMER ON display of the remote controller.
•
Wait for 3 seconds and the digital display area will
show the temperature again. The “TIMER ON” indicator
remains on and this function is activated.
SILENCE
FP
MODE
SWING
SWING
ON/OFF
RESET
LOCK
TURBO
SELF
CLEAN
LED
FOLLOW
ME
TIMER
ON
TIMER
OFF
TEMP
FAN
SPEED
SLEEP
FRESH
2
1
F
auto
silence sleep follow me lock
run
cool
SET TEMP
TIMER ON OFF
dry
heat
fan
Timer operation
Example of timer setting
TIMER ON
TIMER OFF
TIMER OFF
Off
Set
6 hours later
Start
