INTRODUCTION
The END MATCHER is a pneumatically operated machine developed specifically for automatic cutting
of grooves across the end of timber and floorboards in particular. The machine is universally renowned
for the repetitive clean cut across the ends of the timber and the speed that the unit is capable of.
The END MATCHER has been developed over 20 years to meet the needs of the timber industry and
contains many unique features that allows easy access for tool changes and complies with today’s
rigorous safety compliance requirements.
Each machine has been individually tested in the factory and undergoes an extensive pre-despatch
check to ensure that you receive the machine to the standard required.
The machine has been designed to provide a reliable and dependable Machine Tool with excellent
performance. We know the working quality of the machine will confirm that you have made a good
choice by selecting the END MATCHER for your factory.
The manual contains the following sections for Instructions on how best to use the equipment.
• Operating Instructions
• Parts and Assembly Drawings
• Electrical Diagrams
• Pneumatic Diagrams
• Optional Equipment
• Control Box Manual
In order to have a better understanding of the operating procedures, obtain maximum benefits from the
machine and to minimize the maintenance of the equipment, please have the operators and engineers
read the “User Manual” thoroughly and carefully before operating the machine.
ALL OPERATORS AND SERVICE PERSONNEL MUST READ THE ENTIRE MANUAL
BEFORE OPERATING THE MACHINE.
EM-10 / EM-12
This manual describes the machine in current produce on.
We reserve the right to change the specifications without notice.
2
