87
- Start Pattern : Indicates the beginning of the new data when new designated data are received from a
serial device.
- End Pattern : Indicates the end of the data when designated data are received from a serial device.
- Discard Pattern : Does not show the designated data on OSD screen. Sets up in order to designate
dummy data or characters which is not favorably to be displayed. Can be designated up
to 64 of discard patterns in total.
- Line Delimiter : Inputs characters to be used as delimiter between lines.
- MCPL(
M
inimum
C
haracter
P
er
L
ine) : Sets up the number of the minimum strings each line. Does not
show the characters on OSD screen if there is a character of which
number is below the designated number in each line divided by the
line delimiter.
Example)
y
When it firstly connected, the data will be displayed as below
y
Input a certain repeated string to “Line Delimiter”.
y
Decide the number of minimum characters in “MCPL” item to hide data under the designated number of characters.
