23
y
Four rows will show as follows:
–
1:
SATA 1 Port
–
2:
SATA 2 Port
–
3:
SATA 3 Port
–
4:
SATA 4 Port( B type model only )
Format
y
You must format when you:
–
install new HDD
–
add another HDD
–
replace HDD
–
move HDD (change installation port)
–
remove HDD
y
Click (
) Add/Remove frame in Format column and choose ‘OK’ on the dialogue box to start formatting.
y
Following format, DVR will auto-reboot. If there are more than 2 HDDs, please format each of HDDs. DVR will auto-reboot
when all the HDDs are formatted.
y
If the frame changes to ‘---‘ after reboot, it means formatting has been properly done.
S.M.A.R.T
y
Click the frame on S.M.A.R.T column and temperature and HDD damage will show.
S.M.A.R.T Setup
y
Please click (
) S.M.A.R.T Setup and the following screen will appear.
y
Check the square box
5
next to Use On. Through S.M.A.R.T function, make alarm message, indicating HDD damage, will
show.
y
Check
5
Beep, it will give the alarm sound, indicating HDD damage, as the SMART setup.
y
Check
5
Blink Message, the alarm message will blink on the OSD, as the SMART setup.
y
If you uncheck Used on, Beep, Blink Message will be unchecked automatically. Only when you check
5
Used on, you can
CAUTION
EXECUTE REMOVE PROCEDURE EVEN WHEN YOU REMOVE PREVIOUSLY INSTALLED HDD. THE REMOVE PROCEDURE IS
THE SAME AS THE FORMAT PROCEDURE DESCRIBED ABOVE.
