32
y
Transfer Speed is used for setting a mean transfer speed per unit of time between a client and a DVR.
y
Set a proper Transfer Speed for a current configuration state of the network for the client to be able to playback DVR screen
in optimum state.
y
There is a total of 14 different transfer speeds you may choose. (bps: bit per second)
56 kbps, 128 kbps, 256 kbps, 512 kbps,
1 Mbps, 2 Mbps, 4 Mbps, 8 Mbps, 10 Mbps, 20 Mbps, 40 Mbps, 80 Mbps, 100 Mbps, Unlimited
y
Network video transmission speed and quality can be configured by pressing “Frames” and “Quality” buttons as follows.
-
Frames : 1, 2, 3, 4, 5, 7, 15 frames for NTSC(1, 2, 3, 4, 5, 6, 12 frames for PAL)
-
Quality : Std. 1, Std. 2, Std. 3, Std. 4 (standard), High 1, High 2, High 3, Super 1, Super 2, Super 3
y
The Port Number Setup menu will allow you to set Administrator and Port Number for Video/Audio and Web Port.
y
For Port Number Setup, please get an approval of the network administrator in connection with CMS program.
Port Number:
-
Administrator:
5000~9999
-
Video / Audio:
5000~9999
-
Web:
80~4999
y
Choose ‘OK’ to confirm the setting.
y
Please click (
) Notification and the following screen will appear.
y
The Notification menu will allow you to set transmission of Event occurred in DVR via E-Mail.
y
Click (
) the keyboard icon on the right-hand side of Add E-Mail frame and the virtual keyboard will appear. Please register
Notification
CAUTION
IF Port Number IS CHANGED, YOU MUST ALSO CHANGE Port Number OF CMS (Central Monitoring Station) PROGRAM.
CAUTION
CHANGES BEING MADE ARE APPLIED AFTER YOU COMPLETE SETUP TO EXIT.
CAUTION
YOU CANNOT CHANGE Port Number DURING CMS ACCESS TO DVR.
