10
2.1
Hard disk and DVD-RW Installation
2.1.1 SATA
Port
y
Main substrate of this DVR has three SATA ports: they are indicated as SATA 1,2 and SATA 3.(
A Type
)
Main substrate of this DVR has four SATA ports: they are indicated as SATA 1,2 and SATA 3,4.(
B Type
)
y
Up to two SATA devices (hard disk and DVD-RW) are connected in Serial to the SATA ports, but the devices must be
connected correct SATA port.
y
Please mount DVD-RW at the
SATA 3 port.
(
A Type
DVR)
Please mount DVD-RW at the
SATA 4 port.
(
B Type
DVR)
y
Refer to below table to mount a hard disk and DVD-RW.
A Type
Storage
SATA 1,2 Port
SATA 3 Port
HDD DVD-RW
1
2
3
1 1
HDD ----
DVD-RW
A Type 4/8/16
Channel DVR
2 1
HDD HDD
DVD-RW
B Type
Storage SATA
1,2
Port SATA
3,4
Port
HDD DVD-RW
1
2
3
4
1 1
HDD ---- ---- DVD-RW
2 1
HDD HDD ---- DVD-RW
3 1
HDD HDD HDD DVD-RW
B Type 4/8/16
Channel DVR
4 0
HDD HDD HDD
HDD
2.1.2
No Jumper Designation
y
SATA device does not use jumper. You only need to connect SATA device to SATA port according to HDD/ DVD-RW you
have. A connector for designation is located between the 7-pin SATA connector and the 15-pin Power connector.
2.1.3 HDD
Installation
y
Securely fix a hard disk by using bracket and screws provided herewith.
y
Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.
Otherwise, it may cause damage to the hard disk.
CAUTION
Install hard disk after DVR power is off. Otherwise, it may cause permanent damage to the hard disk. To turn off DVR, please click (
)
SETUP>SYSTEM>Shutdown. Also, wait for 5 seconds before plugging in power supply again.
2. Installation
