Screw the gutter
attachment completely.
Do s
ilicon
work from the
inside at the connecting
part
of the front frame caps
as
below figure.
Screw the roof retainer in
order from the front frame side
with small truss screws
4○10○7.
Insert the roof retainer into
the front and strike to the
attached rubber bead.
panel
panel
gutter
step4
step1
step3
step2
note
front frame
front frame
side frame
small truss
screw
4×10×7
（parts set）
front frame cap
s
ilicon
If the screws of retainer ≧middle part∞ tighten too
much,the screw will run idle.≧tightening torque
less than15kgf.cm∞
If the screw head leans when installing the
retainer, it will cause water leakage≧water will
enter from the screw head clearance∞, So install
it not to making clearance.
Screw the roof retainer≧end∞
at a tilt abjusting the shape of
the ditch.
roof retainer≧middle∞
roof retainer rubber bead
≧roof rafter set∞
≧side frame set∞
end roof retainer
≧side frame set∞
end roof retainer
parallel
gutter attachment
Ins tallation of Roof Retainer
