Fix the arm to the arm hanging
bracket with hexagon bolts
M10○90.
step1
Fix the arm hanging bracket to the
post with hexagon bolts M10○150
from the side and M10○25 from the
front.
step2
Attach the arm cap to the side
frame side of the arm with drilling
screw 4○10○8.
�
When screwing, make a ／3 hole
first adjusting the hole of the arm
cap.
step3
Be sure to insert
the two washers
to the bolt
M10○95.
The post has
right-left and
front-back direction.
The bolt hole is
inside and the arm
side is front.
The right-left is
indicated by the
view from the arm
side (The figure
indicates right side)
step4
Insert the anchor rod into the
post hole.
anchor
step5
support
stand
plumb bob
Insert post into the base hole and
fix with support stand not to fall down.
Check if it is flat and vertical with
plumb bob ,and cast concrete.
hexagon bolt
M10×150
washer 10
washer 10
washer 10
washer 10
spring washer 10
spring washer 10
cap nut M10
post
post
ornament
washer 10
spring washer 10
cap nut M10
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
≧parts box∞
（parts box）
hexagon bolt
M10×95-30
（parts box）
hexagon bolt
M10×25
（parts box）
drilling screw
4×10×8
（parts box）
arm hanging
bracket
≧arm set∞
arm
arm
arm cap
Ins tallation of Arm
