Sort the panel equally
The gutter attachments without cutting
are used at both ends.
end parts
middle parts
Insert the panel into
the front frame.
Adjusting the position of the
roof panel fix the gutter
attachment with small truss
screws 5○10○10 temporarily.
Position the roof panel end
at 18mm from the fin of the
gutter.
panel
panel
gutter
gutter
gutter attachment
gutter
When using the polycarbonate mat≧SI∞
and FRP panel, attach the unevenness
side down.
Otherwise the panel color
may
change by
sunlight.
The panel width has two size, when D24,30,
48,54,60, the wider panel≧width 703mm∞
put at both ends, and the smaller one
≧width 575mm∞put at midspan.
In only case of D27 all panels width are
575mm.
Roll the panel as the label indicating
sunny side of polycarbonate and
heat protection polycarbonate is
inside, and the unevenness side of
FRP is outside.
step2
step1
Peel off the
protective
sheet
ing
, and
put the rolled roof panel on the roof
rafter.
Spread it from front frame side
to the
gutter side.
step3
note
front frame
side frame
front frame
cutting
small truss
screws
5×10×10
（parts set）
roof rafter
Ins tallation of Roof P anels
