Cansec Canlan, Руководство по установке

Страница: 6 / 31

CanLan Page 6 of 31
Installation Manual August 2014 • Rev. 1.2
POWER INPUT
There are two options for providing power to the Canlan:
1. AC input
2. 12 VDC input

AC Adaptor
The supplied AC power adapter can be plugged into the AC adaptor
connector on the back of the Canlan.
NOTE : a power outage will result in a
20-30 loss of connectivity to the device.

12 VDC Battery Backup (recommended)
The Canlan can be wired via the RS485 header connector to a Cansec access
control panel's 12 VDC output. Wiring the Canlan to a panel with battery
backup will prevent the unit from being reset during an AC power failure.
AC Adaptor
Connector
RS485 Header
Connector
GND
(
–) NEG
12 VDC
(+) POS