Cansec Canlan, Руководство по установке

Страница: 12 / 31

CanLan Page 12 of 31
Installation Manual August 2014 • Rev. 1.2
5. While LED B is illuminated, make a connection by choosing Connect
from the CanLan Configuration Software main menu.
6. If LED B is on, choose your connection method:

If you are using a serial connection, choose Connect via Serial Port and
choose the appropriate COM Port from the drop-down menu.
7. If you are using a network connection, choose Connect via Network and
enter the CanLan's default IP address: 10.0.0.100.
The COM Port number can be found
by going to
Control Panel > System >
Hardware > Device Manager
If LED C is not illuminated on the
CanLan, a proper electrical connection
does not exist between the PC and the
Canlan. This may indicate problems
with the crossover cable, Canlan, or
host PC ethernet card.