Canon VB-R13VE Скачать руководство пользователя страница 190

Страница: 190 / 263

190

No.1: Video Detection Status is ON

No.2 and 3: Video Detection Status is OFF

Displaying Settings for Detection Areas/Detection Lines, Non-Detection
Area and Detection Results (Display Options)

Configure the detection area/line, non-detection area, and detection results displayed in the video display area.

You can select the following for either [Detection Area/Line] or [Detection Results].

[Selected Detection Settings Only]

Show the detection areas/lines or detection results only for those detection settings selected in Detection Settings

(List).

[All Detection Settings]

Show the detection areas/lines or detection results for all detection settings in Detection Settings (List).

[Detection Settings of the Same Type]

Show the detection areas/lines or detection results for the same types of detection settings as those selected in

Detection Settings (List).

[Do not display]

No detection areas/lines or detection results are shown.

The following settings can be selected for [Non-Detection Area].

[Only selected non-detection areas]

Only the non-detection areas selected in the Non-detection Area Settings (List) are displayed.

[All non-detection areas]

All the non-detection areas in the Non-detection Area Settings (List) are displayed.

[Only enabled non-detection areas]

Only the non-detection areas with [Enable non-detection area] selected in the Non-detection Area Settings (List) are

displayed.

[Do not display]

No non-detection areas are displayed.

Reducing Effects of Lighting Change (Detections Settings)

The Intelligent Function may not work when the entire screen is exposed to sudden changes in brightness, for example,

when indoor lights are turned on or off. Changing the detection settings may reduce this effect.

Содержание VB-R13VE








































































































































































































































































Результаты поиска

Содержание VB-R13VE

Отзывы:

Похожие инструкции для VB-R13VE

Бренды по названию

Популярные бренды

Canon VB-R13VE, Руководство по эксплуатации

Результаты поиска

Содержание VB-R13VE

Отзывы:

Похожие инструкции для VB-R13VE

Бренды по названию

Популярные бренды