Canon varioPRINT 110, Руководство по эксплуатации

Страница: 168 / 454

Change the Print Delivery Settings
Introduction
Usually the print delivery settings have been defined in the printer driver. This section describes
how to change some settings on the control panel.
Overview of the Print Delivery Settings
Setting Description
[Output location] Change the output location for the job. The list shows all the out-
put locations that are available for your system.
Make sure there is a match between the selected output location
and the job requirements. For example, when a job requires sta-
ples, you must select an output location that allows stapling.
[Sort] Change the sorting method of the prints. You can select sort [By
page] or [By set].
[39] Sort by page
[40] Sort by set
[Offset stacking] Stack the prints with an offset.
This setting is only available when the [Offset stacking] setting of
the active [Workflow profile] is set to [Sets (as in job)].
[Advanced settings] Finishing equipment often requires that the printed sheets are de-
livered in a certain order. For finishers that are integrated in your
printing system, the required settings are adapted automatically.
However, sometimes it can be necessary to change a number of
settings manually, for example when you want to finish the prints
using offline finishers. If required, you can change the [Sheet or-
der], [Sheet orientation], [Print order] and [Rotation].
NOTE
You cannot change this setting for the active print job .
Procedure
1.
On the control panel, touch [Jobs] -> [Queues] -> [Scheduled jobs] or [Waiting jobs], or select a
DocBox.
2. Touch the job you want to change.
3. Touch [Properties], or double-tap the job to open the [Properties] window.
4. Touch the [Print delivery] button.
5. Make the required changes.
6. Press [OK].
Change the Print Delivery Settings
Chapter 6 - Carry Out Print Jobs 167
Canon varioPRINT 135 Series