Canon SmartBase 1270D, Руководство по обслуживанию

Страница: 78 / 406

CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2002 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
2-32
3.4 Bit Switch Settings (#1 SSSW)
A bit switch consists of 8 bits, used for registering/setting an item. The switch is configured
as follows, and each bit is always either ‘0’ or ‘1’:
SW01
0 0 0 0 0 0 0 0
Bi
t
7
Bi
t
6
Bi
t
5
Bi
t
4
Bi
t
3
Bi
t
2
Bi
t
1
Bi
t
0
F02-304-01
Do not change service data marked “not used” for its initial setting.
#SSSW-SW01: error/copy control
Bit
0
1
2
3
4
5
6
7
Function
service error code
error dump list
not used
not used
not used
not used
not used
user setting restriction
1
output
output
-
-
-
-
-
do not impose
0
do not output
do not output
-
-
-
-
-
impose
Factory setting
0
0
0
[Bit 0]
Use it to specify whether or not to generate a service error code. If set to ‘1’, a service error
code will be indicated on the report.
[Bit 1]
Use it to specify whether or not to generate an error dump list. When set to ‘1’, an error
dump list will be attached to an error TX report or a RX report generated in the event of an er-
ror.
[Bit 7]
Use it to impose or not impose restrictions on user settings. If set to ‘0’, certain items can-
not be set by the user, depending on the country setting. If set to ‘1’, on the other hand, all
items may be set by the user, regardless of the country setting.