Canon SmartBase 1270D, Руководство по обслуживанию

Страница: 48 / 406

CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2002 CANON INC. 2000 2000 2000 2000 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
2 - 2
[7] In Use/Memory Lamp *1
It goes ON when an original has been read, a delayed fax transmission has been se-
lected, or memory reception has been used. Further, it flashes while fax transmission is
under way.
[8] Alarm Lamp
It flashes when a fault has occurred in the machine (e.g., paper jam).
[9] Energy Saver Key
Press it to manually select or deselect energy save mode. It remains ON when the ma-
chine is in energy save mode, and goes OFF when the machine leaves the mode.
[10] Stop/Reset Key
Press it to stop making copies or transmitting a fax. Or, press it to reset the machine
white making mode settings (i.e., to return copier/fax mode to standard mode).
[11] Start Key
Press it to start making a copy or sending a fax.
[12] # Key
Press it to enter a “symbol” when registering fax/telephone number or when entering a
fax telephone number.
[13] Keypad
Use it to enter a copy count or a value for Zoom, or when entering a fax telephone num-
ber.
[14] * Key
Press it to generate a tone signal from a dial (pulse) circuit when using a fax function.
[15] Right Arrow/+ Key
Press it to add a value when making various settings or to indicate the next setting or an
item.
[16] Image Quality Key
Press it to select a copy image quality type (text, text/photo, photo).
[17] Paper Select Key
Press it to select a source of paper (cassette, manual feed).
[18] OK Key
Press it to store various selections or settings.
[19] Exposure Key
Press it to change the copy density. (auto, or manual from 9 steps)
[20] Enlarge/Reduce Key
Press it to select a default Enlarge/Reduce ratio or Zoom.
[21] Left Arrow/- Key
Press it to subtract a value when making various settings or to indicate the previous set-
ting or an item.
[22] One-Touch/Fax Function Key (after a press on the Function key)
*1
Press it to dial a pre-registered telephone number. A press on the Function key will cause
it to serve as the Fax Function key.
*1: If equipped with fax functions.