85
■
When the duplex unit is installed
1
Press "
○
○
○
○
" of the power switch on the printer to turn it OFF
a
,
unplug the cord from the AC outlet, and then remove the
ground wire from the ground terminal
b
.
2
Remove all interface cables, the power cord, and ground wire.
3
Open the top cover.
IMPORTANT
Raise the top cover slowly and firmly, and open it completely until it stops. If any
jammed paper is removed when the top cover is not opened completely, it may
result in damage to the printer.
4
Pull out the paper cassette.
5
Open the multi-purpose tray, open the toner cover, and then
take out the toner cartridge.
6
Close the toner cover and the multi-purpose tray.
OFF
ON
a
b
Содержание Satera LBP-3700
Страница 1: ...Laser Beam Printer User s Guide User s Guide ...
Страница 79: ...78 4 Open the duplex unit top cover 5 Remove the paper jammed in the duplex unit top cover ...
Страница 89: ...88 10 Open the duplex unit bottom cover 11 Remove the jammed paper 12 Close the duplex unit bottom cover ...
Страница 107: ...106 IMPORTANT This is a sample of Status Print The contents may differ from the Status Print printed by your computer ...