41
4
Before loading transparencies or labels, fan them in small
batches and align the edges.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
IMPORTANT
•
Be sure to fan the transparencies or labels thoroughly before loading them. If they
are not fanned enough, this may result in misfeeds or paper jams.
•
When fanning or aligning the transparencies, try to hold the edge of paper as much
as possible to avoid touching the printing side.
•
Take care not to mark or stain the printing surface of the transparencies with
fingerprints, dust, or oil. This may result in poor print quality.
5
Gently load the stack of paper with the printing side facing up
until it touches the back of the tray.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
Thoroughly fan in small batches
Tap the edges on a
flat surface a few times
Paper limit mark
Содержание Satera LBP-3700
Страница 1: ...Laser Beam Printer User s Guide User s Guide ...
Страница 79: ...78 4 Open the duplex unit top cover 5 Remove the paper jammed in the duplex unit top cover ...
Страница 89: ...88 10 Open the duplex unit bottom cover 11 Remove the jammed paper 12 Close the duplex unit bottom cover ...
Страница 107: ...106 IMPORTANT This is a sample of Status Print The contents may differ from the Status Print printed by your computer ...