background image

Network Settings on the Projector

140

Turning On / Off DHCP Func-
tion

[DHCP]

You can turn the projector DHCP function 
on and off. 

Press the 

OK

 button to accept your setting 

and then press the 

MENU

 button.

• [Off] is the factory default.

What is PJLink?

In September 2003, the PJLink Work-
ing Group was established under the 
Data Projector Committee. During the 
first year, this PJLink Working Group 
standardized PJLink as a new inter-
face specification for projectors.
PJLink is a unified standard for opera-
tion and control of projectors.
It allows centralized control of projec-
tors and operation from a controller for 
all projectors regardless of manufac-
turer.
The objective is for JBMIA to improve 
convenience for users and expand 
the use of projectors through early 
systemization for network monitoring 
and control of projectors, which will 
become the mainstream in the future.

Class 1: Standardization of control 
and monitoring specifications for 
basic projector functions
Basic projector control: Power control, 
input selection, etc.
Acquisition of projector information 
and status: Power status, input selec-
tion status, error status, lamp use 
time, etc.

JBMIA:  Japan Business Machine and 

Information System Industries 
Association
The Japan Business Machine 
and Information System 
Industries Association is an 
organization which was 
launched in 1960 and 
changed its name on April 1, 
2002.

PJLink is a registered trademark of JBMIA and 
pending trademark in some countries.

Off

Disables the DHCP function. TCP / IP 
settings are possible.

On

Enables the DHCP function. 
Searches the DHCP server

.

 Because 

the IP address is acquired from the 
DHCP server, it is not necessary to 
enter the TCP / IP setting items (IP 
address, subnet mask, gateway 
address).

DHCP

Network Setting

Содержание REALiS WUX4000 D





























































































































































































Отзывы: