background image

22

About CF Cards...

• CF cards are high-precision electronic devices.

Do not bend them, apply force to them, or
subject them to shocks or vibration.

• Do not attempt to disassemble or alter a CF

card.

• Moving a CF card rapidly between temperature

extremes will cause condensation to form in
the card and lead to a malfunction. To avoid
condensation, place the CF card in a sealed
plastic bag before moving it into a different
temperature zone and allow it to adjust slowly
to the new temperature. If condensation forms
on the CF card, store it at room temperature
until the water droplets have evaporated
naturally.

CF Cards and Estimated
Capacities (Recordable Images)

PowerShot A10

FC-8M FC-16M FC-32M FC-64M FC-128M

10

21

43

88

177

16

32

67

135

271

32

64

131

263

528

16

32

67

135

271

24

49

102

205

412

46

92

189

379

760

35

70

143

288

577

50

99

206

415

831

87

172

353

707

1417

• Be aware that use of CF cards whose

contents have been edited at another
camera or with another company’s software
may cause the camera to operate
incorrectly.

• Place the CF card in the supplied case for

storage.

• Do not use or store CF cards in the following

types of location.
- Locations subject to dust or sand
- Locations subject to high humidity and high

temperatures

Содержание PowerShot A10
















































































































































































































































Отзывы: