Canon Optura 300 Скачать руководство пользователя

Страница: 38 / 167

Mastering

the Basics

Playing Back with the Built-in Speaker/Headphones

❍

When using the built-in speaker, make sure that “

” is not displayed on the

screen. When using the headphones, make sure that “

” is displayed. Change

the setting as necessary (

74).

❍

The built-in speaker does not sound when “

” is displayed.

❍

Do not connect headphones unless “

” is displayed as it produces noise.

❍

The built-in speaker is monaural. Use headphones for stereo sound.

❍

The setting has to be done separately for each operating mode. Make sure to
change the setting when you have change the operating mode.

Adjusting the Volume

Turn the selector dial up to increase the volume, and
down to lower the volume.

• A volume bar appears for 2 seconds.

• You can turn off the volume completely by turning the selector

dial down until [OFF] appears. Turn the selector dial up to increase

the volume again.

❍

Sound may become distorted when the volume is turned up too high.

❍

The camcorder retains the setting even if you turn it off (separately for
headphones and built-in speaker).

❍

Содержание Optura 300








































































































































































Результаты поиска

Содержание Optura 300

Отзывы:

Похожие инструкции для Optura 300

Бренды по названию

Популярные бренды

Canon Optura 300, Инструкция по эксплуатации

Результаты поиска

Содержание Optura 300

Отзывы:

Похожие инструкции для Optura 300

Бренды по названию

Популярные бренды