Canon Optura 300 страница 18 Скачать руководство пользователя

Страница: 18 / 167

How much power is left?

The battery symbols indicate the charge status of the battery

pack.

When the battery pack is empty, "CHANGE THE BATTERY PACK"

appears for 4 seconds and

starts flashing in red.

The battery charge indicators are not constant – they vary

according to the condition under which battery pack and

camcorder are used.

Battery Pack Handling Precautions

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might explode).

• Do not expose the battery pack to temperature higher than 140º F (60º C). Do

not leave it near a heater or inside a car in hot weather.

• Do not try to disassemble or modify it.

• Do not drop or knock it.

• Do not get it wet.

❍

Charged battery packs continue to discharge naturally. Therefore, charge them on

the day of use, or the day before, to ensure a full charge.

❍

Attach the terminal cover whenever a battery pack is not in use. Contact to metallic

objects may cause a short circuit and damage the battery pack.

❍

Dirty terminals may cause a poor contact between the battery pack and the

camcorder. Wipe the terminals with a soft cloth.

❍

Since storing a charged battery pack for a long time (about 1 year) can shorten its

lifecycle or affect performance, we recommend to discharge the battery pack fully

and to store it in a dry place at temperatures no higher than 86˚ F (30˚ C). If you do

not use the battery pack for long periods, charge and discharge it fully at least once

a year. If you have more than 1 battery pack, perform these precautions at the

same time for all battery packs.

❍

Although the battery pack’s operating temperature range is from 32˚ F to 104˚ F

(0˚ C to 40˚ C), the optimal range is from 50˚ F to 86˚ F (10˚ C to 30˚ C). At cold

temperatures, performance will temporarily decline. Warm it in your pocket before

use.

❍

Replace the battery pack if the usable time after full charge diminishes substantially

at normal temperatures.

Mastering

the Basics

Содержание Optura 300








































































































































































Результаты поиска

Содержание Optura 300

Отзывы:

Похожие инструкции для Optura 300

Бренды по названию

Популярные бренды

Canon Optura 300, Инструкция по эксплуатации

Результаты поиска

Содержание Optura 300

Отзывы:

Похожие инструкции для Optura 300

Бренды по названию

Популярные бренды