manualshive.com logo in svg

Canon MX920 series, Онлайн-руководство

Поделиться
Скачать
Canon MX920 series Скачать руководство пользователя страница 157

1304

Cause

Paper is jammed when performing automatic duplex printing.

Action

If the paper is jammed when performing automatic duplex printing, remove the paper following the
procedure below.

Important

The power cannot be turned off while the machine is sending or receiving a fax, or when the received

fax or the unsent fax are stored in the machine's memory.
Make sure if the machine completed sending or receiving all the faxes before disconnecting the power
cord.
If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

Note

If you need to turn off the machine to remove jammed paper during printing, press the 

Stop

 button to

cancel print jobs before turning off the machine.

1.

Detach the rear cover.

Pull out the rear cover.

2.

Detach the transport unit cover.

Lift up the transport unit cover, then pull it out.

3.

Pull out the paper slowly.

Содержание MX920 series












































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды