Canon MultiPASS L90, Руководство пользователя

Страница: 73 / 230

Canon MultiPASS L90 Hardware User’s Guide ENGLISH
3-25 Chapter 3 Registering Information in the MultiPASS L90
J
Each one-touch speed dial button or coded speed dial code can store either a
name and number for speed dialling or a group. Be careful not to override
speed dial names and numbers when creating and storing groups.
J
If you wish to register a group under a one-touch speed dialling button or
coded speed dialling code already registered for speed dialling, or if you want
to re-enter a group, you must delete the previous information first. (
Q
p. 3-16,
3-21)
5. Press SET twice.
SET SET
TEL=
6. Enter the speed dial numbers you want to store in the group.
J
If you want to enter a number that is already stored in a one-touch speed
dialling button, press FUNCTION (the FUNCTION lamp goes off), press
the desired one-touch speed dial button(s), and press FUNCTION again
(the FUNCTION lamp goes on).
Ex:
FUNCTION
06
FUNCTION
J
If you want to enter a number that is already stored in a coded speed
dialling code, press CODED DIAL, then enter the two-digit code for the
number. (Press CODED DIAL between each entry.)
Ex:
CODED DIAL
0 7
J
You can add new numbers to a group already registered for group dial.
J
If you want to clear a mistaken entry, press CLEAR.
J
Use the search buttons (
h
,
i
) to scroll through the list of speed dial numbers
registered in the group.
If you wish to delete a number in the list, display that number using the search
buttons, then press CLEAR.
J
You can not register numbers in the group that have not been registered for
speed dialling.
J
If all numbers in a group are deleted, group dialling is cancelled.
J
You can cancel registering or correcting numbers and return to standby mode
by pressing
(STOP) anytime before pressing SET in Step 7.